Mer-Krete Mer-Stik™
DRY POLYMER MASTIC ADHESIVE
A superior grade dry polymer based mastic adhesive for installing ceramic tile and natural stone. Mer-Stik is quick setting mastic adhesive, non slump with excellent bond and workability which allows the tile contractor to grout most tile in less then 4 hours. It is recommended for use with absorptive, semi-vitreous and vitreous tile over properly prepared masonry, concrete, and cement backer board. Mer-Stik is suitable for wet areas like shower walls.

Mer-Krete™ 501 ClassicSet
PROFESSIONAL GRADE PORTLAND CEMENT MORTAR
Thin-Set 501 ClassicSet is a professional grade Portland cement mortar for installing ceramic tile and natural stone. It is designed for interior and exterior applications requiring greater strength and increased open time.

Mer-Krete™ Thin-Set 700
PREMIUM GRADE THIN-SET MORTAR
Thin-Set 700 is a premium portland cement based mortar. When mixed with 150 Acrylic Latex, the resultant adhesive is notched troweled to form a thin-set mortar meeting the strict standards of ANSI A-118.4 requirements. When cured, this adhesive will display excellent physical properties in adhesion, flexibility and reduced water absorption.

Mer-Krete 705 ProSet Plus
MULTI PURPOSE POLYMER MODIFIED PORTLAND CEMENT EGP MORTAR
705 ProSet Plus is a professional grade (EGP) polymer modified Portland cement mortar for installing ceramic and natural stone. Recommended for use in the thin-set installation method for absorptive, semi-vitreous and vitreous tile over prepared masonry, concrete, and cement backer board.

Mer-Krete™ 710 PremiumSet Plus
MULTI PURPOSE POLYMER MODIFIED PORTLAND CEMENT FLEXIBLE MORTAR
710 PremiumSet Plus is a polymer modified, portland cement based mortar. When mixed with water, the resultant adhesive is notched troweled to form a thin-set mortar meeting the strict standards of ANSI A-118.4 requirements. When cured, this adhesive will display excellent physical properties in adhesion, flexibility and reduced water absorption.

Mer-Krete™ 720 MarblePro
MULTI PURPOSE MODIFIED PORTLAND CEMENT MEDIUM BED MORTAR
720 MarblePro is a professional grade polymer modified Portland cement Medium Bed thin-set mortar for installing ceramic tile and natural stone. It is used as a thin-set mortar bed from 3/32" (2.4mm) to 3/4" (19.1mm) thickness after beat in.

Mer-Krete 735 PremiumFlex
FLEXIBLE MULTI PURPOSE POLYMER MODIFIED PORTLAND CEMENT EGP MORTAR
735 PremiumFlex is a professional grade (EGP) Latex-Portland cement flexible multi purpose mortar with superior features likeflexibility, higher strength, extended adjustability and open times. Specially formulated to install ceramic tile, porcelain tile, and natural stone, interior or exterior to a variety of substrates.

Mer-Krete™ 740 Fracture-Guard
MULTI PURPOSE POLYMER MODIFIED PORTLAND CEMENT EGP CRACK ISOLATION MORTAR
Fracture-Guard 740 is a flexible, high performance polymer modified, portland cement based mortar. Fracture-Guard 740 helps guard against substrate movement and reduces the transference of cracks up to 1/8". When mixed with water, the resultant thin-set mortar meets ANSI A-118.11 and ANSI A-118.4 requirements. Fracture-Guard 740 displays excellent physical properties in adhesion, maximum flexibility and reduced water absorption.

Mer-Krete™ 750 QuickFlex
MULTI PURPOSE POLYMER MODIFIED PORTLAND CEMENT FAST SETTING MORTAR
750 QuickFlex is a quick setting flexible mortar which allows the contractor to grout the tile in less than 2 hours, allowing the tile installation open to foot traffic in 4-6 hours. 750 QuickFlex meets the dtrict standard of ANSI A-118.4 requirements.

Mer-Krete™ 801Self Curing Thin-Set
MULTI PURPOSE POLYMER CEMENT FAST SETTING SELF CURING MORTAR
Mer-Krete Thin-Set 801 is a proprietary polymer modified mortar designed to cure without the need for normal evaporation. Mer-Krete 801 is an advanced thin-set engineered specifically for use with all vitreous materials installed over low or non-absorptive subfloors and walls. This mortar meets the strict requirements of ANSI A-118.4 requirements while ensuring a full cure between two impervious surfaces.

Mer-Krete™ Mer-Poxy 400 and 420
EPOXY MORTAR AND GROUT
Mer-Poxy 400 is a two part epoxy mortar system with fillers for setting ceramic and quarry tile, floor brick, pavers, stone and marble. Mer-Poxy 420 is an epoxy grout system compatible with Mer-Poxy 400. When cured, Mer-Poxy 400 and 420 display excellent physical properties in adhesion, as well as water, weather and chemical resistance.

Latex Mortar Additives

Mer-KreteTM™ Latex 200 and Filler 211
MAXIMUM STRENGTH TILE SETTING SYSTEM
Latex 200 is a compounded and stabilized latex emulsion designed for use with Filler 211. The resultant mastic is then notched troweled to form thin mortar beds to set and adhere ceramic, quarrry, brick and stone tiles. When cured, these mastics display excellent physical properties in adhesion, resiliency, water and weather resistance. This system meets or exceeds all ANSI A-118.4 requirements.

Mer-Krete™ Tuff-Flex 442
HIGH STRENGTH FLEXIBLE THIN-SET ADMIX
Designed Specifically For Use With Vitreous Materials
Tuff-Flex 442 is a compounded and stabilized latex emulsion for use with Mer-Krete Thin-Sets. The resultant mortar is notched troweled to form a thin mortar bed for porcelain, granite, quarry and glass mosaic, stone and other hard to set materials. When cured these mortars display excellent physical properties in adhesion, resiliency, water and weather resistance, and exceed ANSI A- 118.4 requirements.

Mer-Krete™ 150 Acrylic Latex
THIN-SET AND GROUT ADDITIVE
150 Latex is a compounded and stabilized latex additive to improve bond strength, water resistance, compressive strength and other physical properties of cement/sand mixes as well as grouts. These mixes may be applied from a feather edge up to the needed thickness. 150 Latex is also used in conjunction with Underlay-M filler to form thick bed mortars.