|
CONSIDERATIONS FOR
INSTALLATION:
• Subsurface must be smooth. If not corrected, irregularities will
reflect on the Auto Deck surface.
• In freezing climates, sufficient pitch is required to insure run-off.
• Drains must be of a design suitable to receive Auto Deck flashing
(i.e. J.R. Smith DX 1250 series).
• Concrete subsurfaces must have a minimum compressive strength
of 3000 psi tested by “point loading” technique.
INSTALLATION:
Work should be performed only by an applicator trained and approved by
Mer-Ko Products, Inc. and must be installed in strict accordance with
the Application Specifications, abbreviated below:
1. Waterproof rubber membrane reinforced with a spunbond resilient fabric
2. A trowel applied coat of a rubber mastic bodycoat
3. Two coats of high solids urethane sealer in standard Mer-Ko color
AVAILABILITY:
Mer-Ko Systems are installed by trained contractors located in several
population centers in the U.S.
TECHNICAL ASSISTANCE:
Specification assistance is highly recommended prior to a proposed installation.
Contact any Mer- Ko technical representative for recommendations.
|
PHYSICAL
& TECHNICAL DATA:
Weight: 2-2.75 p.s.f. at average thickness
Fire Rating:
(ASTM E-108) Class “A”
Adhesion: (In Tension) > 650 p.s.i.
Elongation of Membrane
at Rupture: .22 ft./ft.
Membrane Value:
No seepage under water heads to 115 ft.
Indentation Characteristics:
(MIL-D-3134 F) Complies
Coefficient of Friction:
(MIL-D-3134 Paragraph 4.7.6) .08
Based on standard finish using MS2
aggregate in finish coat
Surface Hardness:
ASTM D-2240 Durometer “D” 84
Chemical Resistance:
Excellent resistance to all petroleum products and 3% solution sulfuric
acid (industrial spillage). Consult manufacturer for separate Chemical
Resistance Chart.
WARRANTY:
The deck covering shall be guaranteed against faulty workmanship
and/or materials for a period of five years. See Mer- Kote warranty
for specific requirements. |
|
